The pipe is a very crucial component of an entire aircon unit. It has to be in the right condition for the aircon unit to work efficiently. When it is well maintained by a reliable aircon servicing company in Singapore and set up correctly, it generally lasts for many years.
But, for it to last long, you need to be careful with certain factors. These factors maintain and increase the longevity of the pipe. If not taken care of, there is a danger of the pipe breaking down.
What is the importance of aircon unit piping?
All aircon unit components, a condenser, an evaporating coil, and a compressor are linked to each other through internal piping. The cooling of the aircon unit occurs within an enclosed circuit. Piping plays a very major role in the entire cooling process.
This is why they should be made from high-quality material. If the quality is inferior, then cracks and leaks can occur, which results in improper cooling. Clean pipes will not retain heat within and result in inefficient cooling and a long lifespan of an aircon unit.
What are the types of piping material in an aircon unit?
The material is employed for exchanging heat within the entire aircon unit. There are two types of piping material used in aircon units, these are copper and aluminum.
Aluminum tends to fade in its use with time, and the majority of the units have gained in the use of copper piping. Both come with their advantages and disadvantages.
Here are the reasons why copper is recommended over aluminum in aircon unit piping:
It is anti-corrosive
Copper is anti-corrosive as compared to aluminum. This property is important during the cooling, the air that is oxidized in the pipes can be handled much better and longer. This adds to the lifespan of the aircon unit.
The cooling process is faster due to lesser specific heat. This enables rapid heat dissipation to the outer environment causing quick cooling. Aluminum needs more heating and cooling time in comparison to copper.
It is durable
Copper is more durable and less fragile than aluminum. They can be soldered in extreme cases like cracking or puncturing.
It is cost effective
When it comes to the long-term efficiency of the aircon unit, it is worth the price rather than settling for lesser-priced material and end up putting your money on repairs and replacements.
Copper is a bit expensive as compared to aluminum. However, considering their durability, lower specific heat, efficiency, anti-rust, and longevity properties, therefore copper is recommended as aircon unit piping.
How long can an aircon unit piping last?
Aircon unit piping can serve you from 12-15 years in general, considering that it is appropriately maintained and well taken care of by a professional aircon servicing company. The lifespan depends on factors like its proper initial setup, well maintained, and regular aircon unit service.
An aircon unit pipe will serve for a lesser time if these factors are neglected. Since it is a crucial aircon unit component, its lifespan impacts the lifespan of the aircon unit operation itself.
Is it necessary to change the aircon unit piping?
You can always ask a professional aircon servicing company to inspect your piping thoroughly. If they find only a minor crack in one place, you can agree on repairing the pipe. However, if there are more leaks that are a result of wear and tear deterioration, you need a replacement.
What are the factors that can impact the lifespan of an aircon unit piping?
It is important to ensure that quality materials are used in their initial installation. They determine the entire aircon unit’s lifespan and operation. Also, every component should be set up appropriately, a haphazard and improper setup can result in gas leakages, premature rusting, water clogging, malfunctioning, etc. An installation by a professional aircon installation company is recommended for this purpose.
Quality of pipes
Piping should have good quality materials as the pipes have to withstand high pressure during their functioning. Weak piping can cause premature failure of the entire aircon unit.
Insulation type
This factor impacts the life of an aircon unit piping as if the insulation is not of high quality, it can enhance the condensation rate of the piping. This in turn results in pipe leakages. The consistent condensation rate can result in pipe damage over time.
Occasional checking
Regular maintenance done by a professional aircon servicing company of the aircon unit to help you identify the aircon issues in its initial phases is mandatory. Any kind of foreign material and dirt that can potentially clog the pipe in the future can be eliminated. Any kind of pipe clogging can result in a decline in the aircon unit efficiency. This can harm the piping system.
About www.338aircon.sg
It’s always a good time to talk about the common issues that aircon units have. This way, you’ll be able to spot if there are problems with your unit or not and prepare for its replacement accordingly. If you require our aircon servicing services, Whatsapp us at +65 9222 4141 for a fast and transparent quote.
338 Aircon Servicing Singapore provides an extensive range of Aircon Services including Aircon Servicing, Aircon Repairs, Aircon Installation of the best aircon brands, Chemical Overhaul, Gas Top-up, Aircon Leaking Water, and Aircon Not Cold Fix, and more. We have a team of professional technicians who are equipped with vast knowledge and experience in the Aircon industry.
We have over 15 years of experience in dealing with aircon works and have completed thousands of aircon works for both residential (Landed, Condo, and HDB) and commercial. We are a highly recommended Aircon Company in Singapore, with many delighted customers and reviews over the years on Google and Facebook.
WhatsApp us at +65 9222 4141 for a transparent quotation and honest pricing for all your aircon needs or Call us at +65 9222 4141. We offer a fast and efficient service to serve any of your aircon needs!